CRRC YGZN2Q240A Traction Converter
CRRC YGZN2Q240A is an integrated traction-auxiliary converter specially developed for permanent-magnet synchronous direct-drive traction systems, which are recognized as the mainstream development direction of next-generation rail vehicle traction due to their high efficiency, high power density, low life-cycle cost, low noise and green environmental benefits. It adopts a master-auxiliary integrated design; each converter contains 3 traction converter units and 1 auxiliary converter unit, supplying 3 traction motors and auxiliary loads respectively with axle-control drive and a single-axle rated power of 1200 kW. The auxiliary converter delivers a rated output capacity of 250 kVA, and the converter operates normally within an ambient temperature range of -40°C to +40°C.We offer comprehensive life-cycle support for the converter, covering equipment supply, on-site installation and commissioning, maintenance training, spare parts provision, and ongoing technical troubleshooting services.
Advantages of CRRC YGZN2Q240A Traction Converter
-
Integrated traction-auxiliary design reduces cabinet count, weight and system cost.
-
Axle-control drive delivers precise independent control of each traction motor.
-
1200 kW single-axle rated power meets high-traction demand of PMSM direct-drive systems.
-
250 kVA auxiliary output supports all on-board auxiliary loads reliably.
-
Wide -40°C to +40°C operating range adapts to severe climatic conditions.
-
Mature four-quadrant control realizes efficient energy regeneration and low loss.
Technical Specifications
| Converter Model: | YGZN2Q240A |
| Traction Converter | |
| Rated Input Voltage: | 1471 V |
| Rated Input Current: | 1420 A |
| Nominal DC Link Voltage: | DC 2800 V ±5% |
| Output Voltage: | 0-2150 V / 3P |
| Nominal Voltage: | 1660 V / 3P |
| Auxiliary Converter | |
| Conversion Mode: | DC-AC |
| Nominal Capacity: | 250 kVA |
| Max Capacity: | 375 kVA (for 3 s) |
| Nominal Input Voltage: | 2800 V |
| CVCF Output Voltage: | 380 V / 50 Hz / 3P |
| VVVF Output Voltage: | 0-380 V / 3P |
Model |
Rated Input Voltage |
Rated Input Current |
DC Link Voltage |
Output Voltage |
Rated Output Current |
|
| GZN2Q245 | AC 1450 V | AC 965 A | N/A | 0-2150 V / 3P | AC 390 A | |
| YGZN2Q234 | 1471 V | 1394 A × 2 | N/A | 0-2150 V / 3P | 390 A | |
| YGZN2Q239 | AC 950 V | 1640 A | DC 1800 V | 0-1390 V / 3P | 620 A | |
| YGZN2Q239A | AC 950 V | 1692 A | DC 1800 V | 1391 V / 3P | 590 A | |
| YGZN2Q240A | 1471 V | 1420 A | DC 2800 V ±5% | 0-2150 V / 3P | N/A | |
| YGZN2Q270 | 4 × AC 2011 V | 4 × 803 A | DC 3600 V | AC 0-2808 V | 4 × 430 A | |
| YGZN2Q271 | AC 1950 V | 897 A | DC 3600 V | 0-2700 V / 3P | 450 A | |
| ——END—— | ||||||
General Information of CRRC YGZN2Q240A |
|||
| Traction Converter | |||
| Rated Input Current | 1420 V | Rated Input Voltage | 1471 V |
| Nominal Intermediate Voltage | DC 2800 V ±5% | Output Voltage | 0-2150 V / 3P |
| Nominal Voltage | 1660 V / 3P | ||
| Auxiliary Converter | |||
| Conversion Mode | DC-AC | Nominal Capacity | 250 kVA |
| Maximum Capacity | 375 kVA (withstands 3 s) | Nominal Input Voltage | 2800 V |
| CVCF Output Voltage | 380 V / 50 Hz / 3P | VVVF Output Voltage | 0-380 V / 3P |
| ——END—— | |||
Locomotive Traction Motor
Model |
Rated Power |
Rated Voltage |
Rated Current |
Rated Speed |
| YJ85A | 1250 kW | 2150 V | 390 A | 1365 rpm |
| YJ90A1 | 1275 kW | 1391 V | 620 A | 1500 rpm |
| YJ116A | 434 kW | 1010 V | 310 A | 403 rpm |
| YJ157A | 425 kW | 1520 V | 200 A | 600 rpm |
| YJ170A | 1250 kW | 2150 V | 380 A | 1499 rpm |
| YJ245A | 1226 kW | 1391 V | 590 A | 1499 rpm |
| YJ277B/C | 1430 kW | 2300 V | 435 A | 1663 rpm |
| YJ286B | 1225 kW | 1660 V | 477 A | 706 rpm |
| YJ288A | 1430 kW | 2575 V | 380 A | 2008 rpm |
| ZD108 | N/A | 376 V | 1180 A | 463 rpm |
| ZD109J | 530 kW | 670 V | 845 A | 770 rpm |
| ZD110 | 235 kW | 400 V | 650 A | 705 rpm |
| ZD126E | 323 kW | 500 V | 710 A | 740 rpm |
| YZ134A | N/A | 850 V | 635 A | 930 rpm |
| YZ141B | 291 kW | 615 V | 520 A | 534 rpm |
| ZQDR310 | 310 kW | 500 V | 680 A | 760 rpm |
| AC Traction Motor | 68 kW | 430 V | 115 A | 882.5 rpm |
| ——END—— | ||||
Locomotive Main Generator
Model |
Rated Voltage |
Rated Power / Capacity |
Rated Speed |
Rated Current |
| JF204D1 | 507/770 V | 3700 kVA | 1000 rpm | 4215/2775 A |
| JF217B | 295/720 V | 1600 kVA | 1800 rpm | 3130/1283 A |
| YJ117A | 2100 V | 4480 kW | 1000 rpm | 1296 A |
| YJ257 | 1160 V | 345 kW | 2000 rpm | 191 A |
| ——END—— | ||||
AC motor
Motor Model |
Rated Power |
Rated Voltage |
Rated Current |
Rated Speed |
Insulation Grade |
Rated Efficiency |
| CDJD113 AC traction motor | 520 kW | 805 V | 478 A | 513 rpm | 200 | 91.50% |
| CDJD114 AC traction motor | 378 kW | 830 V | 340 A | 5998 rpm | 200 | 92.50% |
| CDJD114B AC traction motor | 480 Kw | 660 V | 560 A | 493 rpm | 200 | 91.50% |
| CDJD115 AC traction motor | 330 kW | 690 V | 370 A | 596 rpm | 200 | 91.50% |
| CDJD116 AC traction motor | 125 kW | 550 V | 157 A | 2685 rpm | 200 | 92.50% |
| JD158 AC traction motor | 300 kW | 488 V | 476 A | 5329 rpm | 200 | 91.37% |
| JD159A AC traction motor | 200 kW | 1248 V | 112.2 A | 2172 rpm | 200 | 94% |
| JD160A AC traction motor | 1225 kW | 1375 V | 598 A | 1720 rpm | 200 | 94.50% |
| ——END—— | ||||||
Main generator
Motor Model |
Rated Power |
Rated Voltage |
Rated Current |
Rated Speed |
Insulation Grade |
Rated Efficiency |
| CDJF201 Main Generator | 1400 kW | 265/780 V | 3045/1035 A | 1800 rpm | H | 95% |
| CDJF208F Main Generator | 1800 kW | 1015/1250 V | 1023/831 A | 1000 rpm | H | 95% |
| CDJF212 Main and Auxiliary Generator | 4000 kW | 1346 V | 1716 A | 1000 rpm | 200 | 96% |
| CDJF213A Main Generator | 2200 kW | 321/780 V | 3955/1630 A | 1800 rpm | H | 96% |
| CDJF219 Brushless Excitation Synchronous Generator | 620 kW | 1170 V | 336 A | 1800 rpm | H | N/A |
| JF204DZ Main Generator | 3700 kW | 508/770 V | 4210/2775 A | 1000 rpm | H | 95% |
| TQFR-3000 Main Generator | 3000 kW | 438/613 V | 3936/2805 A | 1100 rpm | H | 85% |
| ——END—— | ||||||
The company’s rail transit products have evolved from initially focusing on diesel locomotive motors and electrical control products to electric locomotives, and now to high-speed trains and high-power locomotive electric transmission systems.
The company has established R&D platforms for electric drive systems, including motors, converters, power modules, IGBTs, and system integration. The independently developed electric drive system for the 350 km/h China Standard EMU marks Yongji Electric Machinery Co., Ltd.’s complete mastery of the core technologies for EMU electric drive systems, achieving a leap from “Made in China” to “Intelligent Manufacturing in China.”
The company’s railway mainline locomotive electric drive products currently cover more than 10 models of locomotives, including the HXD2 and HXD3 electric locomotives and the HXN3 diesel locomotive. The company’s developed EMU traction motors and control systems currently cover more than 10 models of domestic EMUs, including the CRH2, CRH3, and CRH5, holding nearly half of the domestic market share.




Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

Engine Sale Manual

Installation Drawing

Installation Manual

Operation Manual

Parts Catalogue

